| MODEL | CW61(2)63E | CW61(2)80E | CW61(2)100E | CW61(2)120E |
| CW61means without gap; CW62 means with gap |
| CAPACITIES |
| Max weight of workpiece | 2.5 Ton |
| Max.swing over bed | 630mm | 800mm | 1000mm | 1200mm |
| Max.swing over cross slide | 350mm | 485mm | 685mm | 800mm |
| Center distance | 1500, 2000, 3000, 4000, 5000, 6000, 8000, 10000mm |
| Max.swing over gap | 830mm | 1000mm | 1200mm | 1400mm |
| Valid length of gap | 300m |
| Bed width | 550mm |
| HEAD-STOCK |
| Spindle hole | 105mm or 130mm(Option) |
| Spindle nose | C-11 or D-11 |
| Spindle taper | 1:20 |
| Spindle speeds(Number) | 14-750RPM(18 STEPS) |
| GEAR BOX-THREADS & FEEDS |
| Metric threads range(kinds) | 1-240mm(54 kinds) |
| Inch threads rangs(Kinds) | 28-1 T.P.I(36 kinds) |
| Moudle threads range(kinds) | 0.5-60 mm(27 kinds) |
| Diametral threads range(kinds) | 30-1 DP(27 kinds) |
| Longtudinal feeds range(kinds) | 0.048-24.3mm/r (72 kinds) |
| Cross feed range(kinds) | 0.024-12.15mm/r (72 kinds) |
| Rapid feed:Long./Cross | 4/2m/min |
| Leadscrew size:Diameter/Pitch | T48mm/12mm or T55mm/12mm(Option) |
| CARRIAGE |
| Cross slide travel | 250mm | 420mm | 520mm | 620mm |
| Compound rest travel | 200mm |
| Size of tool shank | 32*32mm |
| TAILSTOCK |
| Quill diameter | 100mm | 120mm |
| Quill taper | MORSE #6 |
| Quill travel | 240mm |
| MOTOR |
| Main drive motor | 11kw |
| Coolant pump motor | 0.09kw |
| Rapid feed motor | 1.1kw |
| MODEL | CW61(2)63 | CW61(2)80 | CW61(2)100 | CW61(2)120 |
| CW61means without gap; CW62 means with gap |
| CAPACITIES |
| Max weight of workpiece | 5 Ton |
| Max.swing over bed | 630mm | 800mm | 1000mm | 1200mm |
| Max.swing over cross slide | 350mm | 480mm | 680mm | 880mm |
| Center distance | 1850, 2850, 3850, 4850, 5850, 7650, 9850,11850mm |
| Max.swing over gap | 830mm | 1000mm | 1200mm | 1400mm |
| Valid length of gap | 300m |
| Bed width | 600mm |
| HEAD-STOCK |
| Spindle hole | 105mm or 130mm(Option) |
| Spindle taper | 1:20 |
| Spindle speeds(Number) | 7.5~750RPM | 5.5-730RPM(18 STEPS) |
| GEAR BOX-THREADS & FEEDS |
| Metric threads range(kinds) | 1-240mm(52 kinds) |
| Inch threads rangs(Kinds) | 1-14 T.P.I(26 kinds) |
| Moudle threads range(kinds) | 0.5-120 mm(53 kinds) |
| Diametral threads range(kinds) | 1-28 DP(27 kinds) |
| Longtudinal feeds range(kinds) | 0.01-24.3mm/r (72 kinds) |
| Cross feed range(kinds) | 0.05-12.15mm/r (72 kinds) |
| Rapid feed:Long./Cross | 4/2m/min |
| CARRIAGE |
| Cross slide travel | 370mm | 430mm |
| Compound rest travel | 200mm |
| Size of tool shank | 32*32mm |
| TAILSTOCK |
| Quill diameter | 100mm | 120mm |
| Quill taper | MORSE #6 |
| Quill travel | 240mm |
| MOTOR |
| Main drive motor | 11kw |
| Coolant pump motor | 0.09kw |
| Rapid feed motor | 1.1kw |
| MODEL | CW61100 | CW61125 | CW61140 | CW61160 | MODEL | CW61/2 128 | CW61/2 148 | CW61/2 168 | CW61/2 198 | CW61/2 208 |
| CAPACITIES | | CW61means without gap; CW62 means with gap |
| Max weight of workpiece | 8 Ton | CAPACITIES |
| Max.swing over bed | 1000mm | 1250mm | 1400mm | 1600mm | Max weight of workpiece | 10 Ton |
| Max.swing over cross slide | 620mm | 870mm | 1000mm | 1200mm | Max.swing over bed | 1280mm | 1480mm | 1680mm | 1980mm | 2080mm |
| Center distance | 1.5m,2m,3m,4m,5m,6m,8m,10m,12m | Max.swing over cross slide | 800mm | 1000mm | 1200mm | 1500 | 1600mm |
| Bed width | 780mm | Center distance | 2m,3m,4m,5m,6m,8m,10m,12m |
| HEAD-STOCK | Max swing over gap | 1580mm | 1780mm | 1980mm | 2280mm | 2380mm |
| Spindle hole | Ø 130mm | Valid length of gap | 600mm |
| Spindle taper | Metric 140# | Bed width | 1100mm |
| Spindle speeds(Number) | 3.15~315RPM | HEAD-STOCK |
| GEAR BOX-THREADS & FEEDS | Spindle hole | Ø 130mm |
| Metric threads range(kinds) | 1-120mm(44 kinds) | Spindle taper | Metric 140# |
| Inch threads rangs(Kinds) | 1/4-24 T.P.I(31 kinds) | Spindle speeds(Number) | 3.15~315RPM |
| Moudle threads range(kinds) | 0.5-60 mm(45 kinds) | GEAR BOX-THREADS & FEEDS |
| Diametral threads range(kinds) | 1/2-56 DP(27 kinds) | Metric threads range(kinds) | 1-120mm(44 kinds) |
| Longtudinal feeds range(kinds) | 0.1-12mm/r (56 kinds) | Inch threads rangs(Kinds) | 1/4-24 T.P.I(31 kinds) |
| Cross feed range(kinds) | 0.05-6mm/r (56 kinds) | Moudle threads range(kinds) | 0.5-60 mm(45 kinds) |
| Rapid feed:Long./Cross | 3400mm/min, 1700mm/min | Diametral threads range(kinds) | 1/2-56 DP(27 kinds) |
| CARRIAGE | Longtudinal feeds range(kinds) | 0.1-12mm/r (56 kinds) |
| Cross slide travel | 650mm | Cross feed range(kinds) | 0.05-6mm/r (56 kinds) |
| Compound rest travel | 280mm | Rapid feed:Long./Cross | 3400mm/min, 1700mm/min |
| Size of tool shank | 45*45mm | CARRIAGE |
| TAILSTOCK | Cross slide travel | 860mm |
| Quill diameter | 160mm | Compound rest travel | 280mm |
| Quill taper | METRIC 80# | Size of tool shank | 45*45mm |
| Quill travel | 300mm | TAILSTOCK |
| MOTOR | Quill diameter | Ø260mm |
| Main drive motor | 22kw | Quill taper | METRIC 80# |
| Coolant pump motor | 0.15kw | Quill travel | 300mm |
| Rapid feed motor | 1.5kw | MOTOR |
| | Main drive motor | 30kw |
| | Coolant pump motor | 0.15kw |
| | Rapid feed motor | 1.5kw |
| | Tail stock motor | 1.5kw |
| MODEL | CW61126 | CW61146 | CW61166 | CW61186 | CW61206 |
| CAPACITIES |
| Max weight of workpiece | 20 Ton |
| Max.swing over bed | 1260mm | 1460mm | 1660mm | 1960mm | 2060mm |
| Max.swing over cross slide | 760mm | 960mm | 1160mm | 1360 | 1560mm |
| Center distance | 3m,4m,5m,6m,8m,10m,12m |
| Bed width | 1180mm |
| HEAD-STOCK |
| Spindle hole | Ø 105mm |
| Spindle taper | Ø 140mm---1:7 |
| Spindle speeds(Number) | Variable 4 steps (3-24;6-48;12-96;24-200RPM) |
| GEAR BOX-THREADS & FEEDS |
| Metric threads range(kinds) | 1-60mm(44 kinds) |
| Inch threads rangs(Kinds) | 1/2-30 T.P.I(31 kinds) |
| Longtudinal feeds range(kinds) | 0.1-6mm/r (56 kinds) |
| Cross feed range(kinds) | 0.05-3mm/r (56 kinds) |
| Rapid feed:Long./Cross | 3400mm/min, 1700mm/min |
| CARRIAGE |
| Cross slide travel | 700mm | 800mm |
| Compound rest travel | 280mm |
| Size of tool shank | 45*45mm |
| TAILSTOCK |
| Quill diameter | Ø280mm |
| Quill taper | Ø100---1:7 |
| Quill travel | 300mm |
| STEADY REST |
| Close type steady rest | Ø250~600mm |
| Open type steady rest(Option) | Ø450~780mm or Ø550~1200mm |
| MOTOR |
| Main drive motor | 55kw |
| Coolant pump motor | 0.15kw |
| Rapid feed motor | 1.5kw |
| Tail stock motor | 1.5kw |
| MODEL | CWZ61160 | CWZ61180 | CWZ61200 | CWZ61220 | CWZ61240 | CWZ61250 |
| CAPACITIES |
| Max weight of workpiece | 32 Ton |
| Max.swing over bed | 1600mm | 1800mm | 2000mm | 2200mm | 2400mm | 2500mm |
| Max.swing over cross slide | 1250mm | 1450mm | 1650mm | 1850mm | 2050mm | 2150mm |
| Center distance | 3m,4m,5m,6m,8m,10m,12m,16m |
| Bed width | 1600mm (Integral 3 Guidways) |
| HEAD-STOCK |
| Spindle hole | Ø 85mm |
| Spindle taper | Ø 120mm---1:7 |
| Spindle speeds(Number) | Variable 3 steps (0.8-18;2.4-54;7.2-160RPM) |
| GEAR BOX-THREADS & FEEDS |
| Metric threads range(kinds) | 2-40mm |
| Inch threads rangs(Kinds) | 1-14 T.P.I |
| Module threads | 1.5-20mm |
| Longtudinal feeds range(kinds) | 0.125-45mm/r |
| Cross feed range(kinds) | 0.063-24mm/r |
| Rapid feed:Long./Cross | 3000mm/min, 1500mm/min |
| CARRIAGE |
| Cross slide travel | 720mm |
| Middle slide travel | 600mm |
| Size of tool shank | 70*70mm |
| TAILSTOCK |
| Quill diameter | Ø300mm |
| Quill taper | Ø100---1:7 |
| Quill travel | 300mm |
| STEADY REST |
| Close type steady rest | Ø400~750mm |
| Open type steady rest | Ø650~1200mm |
| MOTOR |
| Main drive motor | 80kw(DC) |
| Coolant pump motor | 0.15kw |
| Rapid feed motor | 1.5kw |
| Tail stock motor | 1.5kw |
FEATURES Machine bed adopts high strength iron to ensure rigidity and precisionUltrasonic frequency quenched guide-ways ensure good wear-resistance*Headstock gears hardened and ground to achieve precision and low noise HEAVY DUTY LATHE INTRODUCTION
The lathe machine is universal metal machining equipment for metal processing, mainly used for turning the internal and external cylindrical surface, conical surface and other rotating surfaces, and turning internal and external pipe threads such as metric, inch, module, DP threads etc., meanwhile this series is also used to drill holes in bar material and make oil groove, this series lathe is able to process metal materials including cast iron, steel and non-ferrous metals.
More Pictures
Chizhou Jarry CNC Machinery Co., Ltd was established in July 2014.
We supply CNC-Lathe; CNC-Milling Machine; CNC Cutting Machine, CNC Spare Parts, CNC Accessories. We also supply other machinery for our clients all over the world. Annual sales is over ten million USD. Our machines has been exporting to Europe, Asia, Africa, South America, North AmericaAustralia and others, realiable after-selling serviceOur company has established perfect hassle-free service system in quick response, which covers pre-sales, sales and post-sales to providespecialized and standardized services in quick response for the customers and safeguard the rights and interestes of the customers.
Our company offers variety of CNC Machining Center, CNC Lathe and other machine tools which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
1. What is the payment Terms ?
A : T/T or L/C ,30% initial payment when order ,70% balance payment before shipment ;Irrevocable LC at sight .
When we receive the advance payment, we will start to make production.when the machine is ready , we will take pictures to you.after we got your balance payment. we will send the machine to you.
2. what is your company mainly produces ?
A : Our company is a professional machine tool manufacturer with many years of experience. The company mainly produces CNC-Lathe; CNC-Milling Machine; CNC Cutting Machine, CNC Spare Parts, CNC Accessories, etc...
3.When is the delivery time?
A: If the machine you will order is standard machine, we can ready the machine within 15days. if some special machines will be some longer. The ship time is about 30 days to Europe, America. If you are from Australia, or Asia, it will be shorter. You can place order according to delivery time and ship time.we will give you the answer accordingly.
4. What is your minimum order quantity and warranty?
A: MOQ is one set, and warranty is one year.but we will offer lifetime service for machine.
5. What is the packaging of the machine?
A: The standard packaging of the machine is wooden pallet with plastic film. 
