Basic Info.
Product Description
2024 aluminum sheet is a typical hard aluminum alloy in the Al-Cu-Mg series. It is used most in 2 series alloys. And It's not difficult to find that the strength of 2024 aluminum alloy is very high. When the temperature is higher than 125ºC, its strength is higher than that of 7075 alloy. In addition, the heat treatment strengthening effect of the 2024 aluminum plate is the most significant. whether it is in the hot state, annealed or newly hardened, Its formability and machinability are very good. 2024 Aluminum Sheet Features:
- Heat Resistance. 2024 aluminum sheet has good heat resistance, can be used for working parts below 150ºC.
- Mechanical Properties. 2024 aluminum plate tensile strength is 470Mpa, 0.2% yield strength is 325Mpa, fatigue strength is 105Mpa, elongation is 12%, and hardness is 120HB.
- Other Characteristics. It should be noted that the corrosion resistance of 2024 aluminum alloy is relatively poor, but anodizing treatment and painting methods, or pure aluminum coating can improve its corrosion resistance. In addition, the 2024 aluminum plate is prone to cracks during gas welding, and requires a special process for welding. It can also be riveted, and spot welding is good.
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Aluminium min. | |
| Each | Total | ||||||||||
| 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.10 | - | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
2024 Aluminum Sheet Mechanical Properties: | Hardness, Brinell | 120 | 120 | AA; Typical; 500 g load; 10 mm ball |
| Hardness, Knoop | 150 | 150 | Converted from Brinell Hardness Value |
| Hardness, Rockwell A | 46.8 | 46.8 | Converted from Brinell Hardness Value |
| Hardness, Rockwell B | 75 | 75 | Converted from Brinell Hardness Value |
| Hardness, Vickers | 137 | 137 | Converted from Brinell Hardness Value |
| Ultimate Tensile Strength | 469MPa | 68000 psi | AA; Typical |
| Tensile Yield Strength | 324MPa | 47000 psi | AA; Typical |
| Elongation at Break | 19% | 19 % | AA; Typical; 1/2 in. (12.7 mm) Diameter |
| Elongation at Break | 20% | 20 % | AA; Typical; 1/16 in. (1.6 mm) Thickness |
| Modulus of Elasticity | 73.1GPa | 10600 ksi | AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus. |
| Ultimate Bearing Strength | 814MPa | 118000 psi | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 441MPa | 64000 psi | Edge distance/pin diameter = 2.0 |
| Poisson's Ratio | 0.33 | 0.33 | |
| Fatigue Strength | 138MPa | 20000 psi | AA; 500,000,000 cycles completely reversed stress; RR Moore machine/specimen |
| Fracture Toughness | 26MPa-m½ | 23.7 ksi-in½ | K(IC) in S-L Direction |
| Fracture Toughness | 32MPa-m½ | 29.1 ksi-in½ | K(IC) in T-L Direction |
| Fracture Toughness | 37MPa-m½ | 33.7 ksi-in½ | K(IC) in L-T Direction |
| Machinability | 70% | 70 % | 0-100 Scale of Aluminum Alloys |
| Shear Modulus | 28GPa | 4060 ksi | |
| Shear Strength | 283MPa | 41000 psi | AA; Typical |
2024 Aluminum Sheet Application: - Routine Application
- In general, 2024 aluminum sheet is mainly used to make various high-load parts and components (non-stamping parts and non-forgings). Including automotive, truck wheel hubs, molds, rivets, propeller elements and various other structural applications.
- 2024 Aluminum Sheet for Aircraft Manufacturing
- The high-end 2024 aluminum plate is a high-strength deformed aluminum for aerospace. Its strength, hardness, toughness, fatigue resistance, and plasticity meet the requirements of aviation materials. At present, 2024 aluminum alloy is mainly used to manufacture skeleton parts, skins, bulkheads, ribs, spar, rivets and other working parts below 150 ºC on aircraft.
Aluminum Sheet/ Aluminum Plate Available Sizes & Specifications: | Thickness | 0.1mm - 6.0mm (Aluminum Sheet) | |
| 6.0mm - 600mm (Aluminum Plate) | ||
| Width | 1000mm - 2650mm | |
| Length | Up to 16m | |
| Temper | O, H12, H22, H32, H14, H24, H34, H16, H26, H36, H18, H28, H38, H19, H25, H27,H111, H112,H241, H332, T3, T4, T5, T6, T651, T3651, T451, T42, T62 etc. | |
| Surface Treatment | Mill Finished, Anodized, Embossed, PVC Coated, etc | |
| 1000 Series | 1050 | Insulation, food industry, decoration, lamp, traffic signs, etc. |
| 1060 | Fan blade, Lamps and lanterns, Capacitor shell, Auto parts, Welding parts. | |
| 1070 | Capacitor, Rear panel of vehicle refrigerator, charging point, heat sink, etc | |
| 1100 | Cooker, building material, printing, heat exchanger, bottle cap, etc | |
| 2000 Series | 2A12 | Aircraft structures, rivets, aviation, machinery, missile components, the card wheel hub, propeller components, aerospace parts,car parts and various other structural parts. |
| 2014 | ||
| 2024 | ||
| 2017 | ||
| 3000 Series | 3003 | Aluminum curtain wall panel, aluminum Ceiling, Electric cooker bottom, TV LCD backboard, storage tank, curtain wall, building construction panel heat sink, billboard. Industrial floor, air conditioning, refrigerators radiators, Make-up board, Prefabricated house etc. |
| 3004 | ||
| 3005 | ||
| 3104 | ||
| 3105 | ||
| 5000 Series | 5005 | Marine applications, bodies of boats, buses, trucks, and trailers. Curtain wall panel. |
| 5052 | Marine and transportation material, railway carriage's inner and outer cabinet, oil and chemical industry storage devices, equipment and medical device panel, etc. | |
| 5083 | Tanker, oil storage tank, drilling platform, shipboard, deck, bottom, welded parts and edge panel, railway carriage's board, automotive and aircraft panel, cooling device, and automotive molding, etc. | |
| 5086 | ||
| 5182 | ||
| 5252 | ||
| 5454 | ||
| 5754 | Tanker body, marine facilities, pressure container, transportation etc. | |
| 6000 Series | 6005 | Railway inside and outside parts, board, and bed plate. Industry molding Highly stressed applications include Roofing construction, transportation, and marine as well as mold. Auto parts, architectural fabrication, window and door frames, aluminum furniture, electronic components as well as various consumer durable products. |
| 6060 | ||
| 6061 | ||
| 6063 | ||
| 6082 | ||
| 6101 | ||
| 7000 Series | 7005 | Truss, rod/bar, and the container in transportation vehicles; Large-sized heat exchangers. |
| 7050 | Molding (bottles) mode, ultrasonic plastic welding mold, golf head, shoe mold, paper and plastic molding, foam molding, lost wax mold, templates, fixtures, machinery and equipment. | |
| 7075 | Aerospace industry, military industry, electronic etc. | |
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.